[vc_row][vc_column width=”1/1″][nectar_slider location=”modal-5″ full_width=”true” fullscreen=”true” parallax=”true” slider_transition=”slide” slider_height=”350″][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][divider line_type=”No Line” custom_height=”15″][/vc_column][/vc_row][vc_row][vc_column width=”1/1″ enable_animation=”true” animation=”fade-in-from-left” column_padding=”no-extra-padding” background_color_opacity=”1″][vc_column_text]
Abstract:
Design development of automotive products is a prime focus area at AdvanSES. We take pride in being able to assist our clients with fast service and high accuracy. Figure 1 shows the hydraulic engine mount design. The part with the different components was reverse engineered so as to be able to generate a suitable 3-dimensional CAD model for FEA analysis. The 6 part design was scanned using 3D printing and subsequently the point cloud was used to generate the CAD.
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″ enable_animation=”true” animation=”fade-in-from-left” boxed=”true” column_padding=”no-extra-padding” background_color_opacity=”1″ centered_text=”true”][image_with_animation image_url=”3046″ alignment=”center” animation=”Fade In From Left” img_link_target=”_self”][vc_column_text]
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″ enable_animation=”true” animation=”fade-in-from-left” column_padding=”no-extra-padding” background_color_opacity=”1″][vc_column_text]
Results and Discussion:
The FEA model is shown in the Figure 1. Hexahedral elements were used to model the different components of the hydraulic mount.
[/vc_column_text][/vc_column][/vc_row]